A Preliminary Study for Six Sigma Implementation in Laser in Situ Keratomileusis (LASIK) Surgeries


Abstract views: 130 / PDF downloads: 106

Authors

  • Mehmet Tolga Taner Uskudar University
  • Gamze Kagan
  • Ibrahim Sahbaz
  • Engin Erbas
  • Sabahat Beyza Kagan

Abstract

The purpose of this study is to show how a private eye care center in Turkey developed a Six Sigma infrastructure to investigate the root causes of complications occuring during LASIK surgeries. To analyze the collected data, main tools of Six Sigma’s Define-Measure-Analyze-Improve-Control(DMAIC) improvement cycle such as SIPOC table, Fishbone Diagram and, Failure, Mode and Effect Analysis were implemented. Experience of the refractive surgeons, type of microkeratome and hygiene of microkeratome were identified to be Critical-to-Quality (CTQ) factors for a successful LASIK surgery. The most frequent complications of LASIK surgeries were found to be dry eye syndrome, subconjunctival haemorrhage and flap edge melt. The process sigma level was found to be 3.7135. Keywords: Six Sigma; ophthalmology; refractive surgery; complications JEL Classifications: I120; L15

Downloads

Download data is not yet available.

Author Biography

Mehmet Tolga Taner, Uskudar University

Department of Healthcare Management

Downloads

Published

2013-12-12

How to Cite

Taner, M. T., Kagan, G., Sahbaz, I., Erbas, E., & Kagan, S. B. (2013). A Preliminary Study for Six Sigma Implementation in Laser in Situ Keratomileusis (LASIK) Surgeries. International Review of Management and Marketing, 4(1), 24–33. Retrieved from https://www.econjournals.com/index.php/irmm/article/view/668

Issue

Section

Articles